question

Fuso avatar image
Fuso asked

battery charger settings for an EasySolar 24/3000/70 when changing to a LifePo4 battery

I have just replaced an AGM battery with LifePo4 & Daly BMS. I have changed the MPPT settings ok but haven't been able to find information on how to change the battery charger settings. Can these be done with dip switches or is connection via the VRM port required ?

charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
klim8skeptic avatar image
klim8skeptic answered ·

It would be best to look at the VictronConnect - VE.Bus Configuration guide.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image
kevgermany answered ·

Dip switch settings are in the manual for the multiplus inside your easysolar.

Compare the battery maker's recommendations to the options you have. You should be able to get there.

But ideally follow @klim8skeptic route.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Chargers.

Additional resources still need to be added for this topic