This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello!
A Venus has a LAN connection and the WiFi as a failsafe enabled and set up in case someone pulls the network cable.
The VRM works fine for 3-10 days until it looses it's connection to the Venus and the only way to get it back online is to power down the Venus and back up again and all works....for some time. DHCP enabled and latest Venus FW.
What could this issue be caused by?
Thanks for any tips!!
Hi @offroadflow
It could be one of many possible things causing it, ISP outages, dicky modem or router, etc.
You could try automating your reboot, like this.. 
I've suffered this myself (I suspect a wan wifi modem issue), but I no longer notice it. The 1 hr delay I think is recommended by Victron somewhere in the literature, as you don't want it rebooting continuously on a longer outage.
