This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, currently I have a Smart Solar RS 450/100Tr in my system. I have some remaining solar panels with 20A (I plan for them a new RS 450/200Tr ), and I already ordered a new set of panels that have 30A Isc, so I need multiple Smart Solar MPPTs, is OK to mix it all and connect to Cerbo(s) via VE.Direct. Is it OK or are there any limitations?
No limits really.
Besides the number if ports on cerbo available (for which there is a work around) and amount of charge the battery can take. (Which can be limited in DVCC if needed)
