question

ted avatar image
ted asked

Difference AC Input vs AC Load after 8 ticks Load

3 Phase System with EM24 and Mulitplus II

See Picture. For some reason, after 8 ticks (8 times refresh/seconds) when L2 have AC Load, the L1 AC Load take over these values. The phase order L1-L2-L3 is correct at the EM24 at input and output. Any idea?

1668099010706.png

1668099131964.png

3 phaseem24
1668099010706.png (67.8 KiB)
1668099131964.png (65.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
ted avatar image
ted answered ·

Ok, I solved this problem. It's the wrong order (L1-L2-L3) of the 3-Phase Multiplus System settings.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.