State of Charge not exceeding 25% even thought Charge Controller on Float?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

james09 asked Nov 8, '22

I'm advice on a 24v Easysolar Unit, Charge Controller 150/35 and BMV712.

Our SOC (on all devices) does not exceed 25% even though the MPPT Charge Controller & Easy Solar are getting to float every day.

We recently replaced the batteries so I dont think it's those.

It feels to me like perhaps the unit is not setup correctly? Perhaps as a 48v system or something?

Any ideas?

screenshot-2022-11-08-192958.png (37.2 KiB)

screenshot-2022-11-08-193010.png (39.9 KiB)

screenshot-2022-11-08-193029.png (46.8 KiB)

screenshot-2022-11-08-193231.png (60.1 KiB)

screenshot-2022-11-08-193538.png (94.2 KiB)

screenshot-2022-11-08-193550.png (115.6 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-11-08T11:54:57Z

Alexandra answered · Nov 08, 2022 at 11:54 AM

You will need to check the settings on the inverter and the mppt. And compare them with the charged voltages set up on all the units.

Your mppt is a smart unit so you can connect with victron connect like you did to the bmv.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2022-11-08T13:02:17Z

klim8skeptic answered · Nov 08, 2022 at 01:02 PM

Victron have a very handy BMV Youtube tutorial. to help people set up their BMV's .

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.