Hi Guys,
I'm making an electrical distribution panel for my 4x4. On the panel are various 12v sockets all running through a fuse block. I was wanting to wire up a load / battery disconnect switch made by Blue Sea and I'm also wanting to run x2 Anderson plugs,
ONE for power out for an inverter most likely and
ONE for a power in for solar.
I have a REDARC BCDC1240D and after looking at the wiring diagrams of the BP 12/100 I am unsure whether to run the BDCD directly to the battery as per redarcs wiring diagram or do I have to run it via the BP 12/100?
appreciate all feedback!