question

benoit avatar image
benoit asked

EasySolar 48/5000 and AC coupling with Multiplus II 48/5000

I have an off grid installation with an EasySolar 48/5000/70 MPPT 150/100 running at full output power. I've installed a new Multiplus II with its own PV and batteries so completely separated from the EasySolar. Is it possible to do AC Coupling with both installations ? AC Out 1A of the EasySolar with AC Out 2 of the Multiplus II or install the Multiplus II AC out as a power Assist to the EasySolar ?

EasySolar All-in-Onepowerassistac coupling
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

You can't run there two different model devices in parallel with their AC-OUT's coupled.
You could cascade them and use one to Power Assist the other, other people have done this before.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

EasySolar 1600 product page

EasySolar-II GX 3000 & 5000 product page

AC-coupling and the Factor 1.0 rule


AC-coupled PV with Fronius PV Inverters



Additional resources still need to be added for this topic

Additional resources still need to be added for this topic