question

faria avatar image
faria asked

Cerbo GX alarm signal on Ruuvi tag sensor

Hi, l know, that there are two relays in the Cerbo GX, for switching. The question is, if you want to make an alarm - based on the Ruuvi bluetooth sensor data - and the two relays are occupied, can Cerbo make alarm signal based on the bluetooth connected sensors signals?

cerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

@Faria

Not directly on the Cerbo GX but on VRM. Just add a new alarm rule for the Ruuvi sensor.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

faria avatar image
faria answered ·

Super! Many thanks! Faria

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.