question

andreas-siebenmorgen avatar image
andreas-siebenmorgen asked

VictronConnect app shows wrong scaling with Phoenix Inverter

My VictronConnect app shows wrong scaling with my Phoenix 48/3000 Inverter.

Instead of 3000VA max it shows 6000VA max.

Any way to fix this by myself?

victron.jpg

VictronConnect
victron.jpg (169.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

6000VA is correct scaling because this is the peak power for that model of inverter.
3000VA is continuous power and it is capable of more than this for short periods of time.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

andreas-siebenmorgen avatar image andreas-siebenmorgen commented ·

So the power gauge shown isn‘t linear?

At least within yellow and red area…

0 Likes 0 ·
wkirby avatar image wkirby ♦♦ andreas-siebenmorgen commented ·
Yes, this give you more room in the linear continuous power region and the non-linear part area of the scale for for non continuous area which would not be visited so often.
0 Likes 0 ·

Related Resources

VictronConnect Manual

Download for iOS / Android / Mac / Windows