This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Because the RS Smart Solar inverter has four mc4 inputs if they only have one mppt
It is necessary to use two positive and negative, or you can use only one input of negative and positive
If I have a (550 x 7 )solar panel with a current of 17A. How do I connect it?
Hi @Jeremias
The Inverter RS Smart Solar with a single tracker has the two positive and two negative PV inputs connected internally in parallel.
Therefore if you are within all other specifications (and it sounds like you are) then you can just use a single cable string and only one pair of the PV panel inputs, leaving the other pair empty.
