question

flare1000 avatar image
flare1000 asked

ATD control wiring - Lynx Smart BMS to Orion DC-DC converter

I'd like to configure the "Orion-Tr Smart Isolated 12/12-30" in "Power Supply Mode". Charging functionality is not needed.

To make sure that Orion is stopped discharging the battery when battery SOC is low, i intend to connect grey part of the "Orion-Tr DC-DC Charger Isolated remote cable" (https://www.victronenergy.com/accessories/orion-tr_isolated_dc-dc_charger_remote_cable) to the Orion Remote On/Off sockets and the yellow and black cable to the Lynx Smart BMS 500 ATD socket (Pin 5 & 6). Cable to pin order does not matter.

Is this wiring correct?


Thank you very much,
David



orion-tr smartlynx bms
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
flare1000 avatar image
flare1000 answered ·

Does anybody have some experience her? Thanks a lot!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.