BMS Allow to charge / discharge alarm is gone from VRM?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

stepir asked Oct 21, '22

Hi

I used to have a rule for monitoring the state of the BMS contacts for allowing charging/discharging but since a while they are not there anymore.

I tried looking back to add them and they are just gone? From my BMS battery I can now see the following:

unfortunately they don't seems to be the same as they are not just recognised/read from my system.

Any hint?

BMS

1666383412649.png (24.8 KiB)

screenshot-2022-10-21-at-220523.png (144.2 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-10-24T20:19:20Z

stepir answered · Oct 24, 2022 at 08:19 PM

32 ppl following this question - anyone from Victron Staff able to give a feedback?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2022-10-27T12:10:40Z

stepir answered · Oct 27, 2022 at 12:10 PM

just trying to get attention here....

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2022-11-02T11:43:38Z

stepir answered · Nov 02, 2022 at 11:43 AM

I might be giving up.....

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.