This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I am using the cerbo relay 1 generator auto start/stop and the digital input for generator run signal. All this functions as expected, but under the generator settings the service interval hours shows "Nan" and when I change the hours and select the checkmark to store the hours it goes right back to "Nan" in the value. Am I doing something wrong?
It sounds like you are using GuiMods. Please confirm this as well as the Venus OS (firmware) version and the GuiMods version (found in the Package Manager menu under Active packages).
"nan" indicates the value is not a number. Please also indicate where you are seeing this: on the generator overview page or somewhere in the menus.
I can not duplicate the issue here.
@Kevin Windrem sorry I should have known to include this info please forgive a newbie.
Venus os large 2.91, guimods 6.15. I am seeing this issue in settings>Generator start/stop>settings>Generator service interval (hours)
Found the problem. Should be fixed in GuiMods v6.16.
