Hi all.
We have installed an EasySolar II GX with an addtional CCGX wired into the main living room to allow customer a quick visual reference at a glance without having to open up his phone.
I have noticed however that the CCGX doesn't show any production values from the charge controller inside the EasySolar, unlike the internal GX device when viewed via a device. I take it this is becase the CCGX is plugged into the MultiPlus side via VE.Direct, hence not being able to see the regulator.
I'm curious if anyone knows if it's possible to send through all of this data to the external CCGX or we are limited to seeing only the data from the MultiPlus?
Thanks in advance.