question

alexwin avatar image
alexwin asked

ESS relay test pending blocks inverter to work

I have a MultiPlus II GX 48/3000/35 with a Pylontech US3000C installed with the latest firmware. Configured including an ESS.

However, the ESS relay test is listed as pending in the Remote Console and therefore blocking the inverter to work. With a system reset the test is shortly listed as completed, but once the ESS starts the test changed to pending again.

The battery is loaded to 100% and is toggling between bulk and absorption state only.

I have reconfigured everything multiple times and also flashed the firmware twice.

Any proposals?


ess discharging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
alexwin avatar image
alexwin answered ·

Nevermind, I found my bug just after submitting this question. The switch of the multiplus was on position "charge only (2)" instead of "on (1)"...

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic