question

david-b avatar image
david-b asked

I am charging a SOK 100 AH battery. Should I set the charge rate at 14.4, 14.7 or Li-ion?

I am charging a SOK 100 AH battery. Should I set the charge rate at 14.4, 14.7 or Li-ion?

battery charging
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

@David B

You should set the charging voltage as suggested by the manufacturer. It's best to ask SOK.


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

david-b avatar image
david-b answered ·

Thank you. This is what I got and it was great information.

Hello David, Victron’s Li-Ion profile is NOT sufficient for non-Victron LiFePO4 batteries. Enter configuration and turn on “ADVANCED” switch, then select “Custom” charge preset. Then click “Advanced Battery Settings”. The battery preset should be set to “User Defined”. Turn on “Expert Mode” switch. Charge Voltage Settings: Absorption Voltage: 14.6v Float Voltage: 13.8v Storage Voltage: 13.6v Recondition Voltage: Disabled BatterySafe: Disabled Voltage Compensation: Temperature Compensation: Disabled Bulk: Bulk Time Limit: 24 Hours Re-bulk Current: Enabled, set to full output current of charger, typically 25A Absorption: Absorption Duration: Fixed Absorption Time: 1 Hr Repeated Absorption: Every 7 days Recondition: Recondition Stop Mode: Fixed time Recondition Duration: 15M (This is the minimum allowed setting. It is already disabled in charge voltage settings, but set to this as a safety precaution)

Regards, Min https://www.us.sokbattery.com Please join in our Facebook group to get support. https://www.facebook.com/groups/sokbatteryThis

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.