I feel like this has probably been discussed previously in the forum but I'm not able to find it. If it has, feel free to point me to that string instead of answering again.
I have an all Victron installation in my Sprinter van: 4 x 200Ah batteries, VE.Bus BMS, MultiPlus-II 3000W, Cerbo GX, GX Touch, MPPT 100 / 30, SmartShunt and it is all running great. However I'd like to be able to see the battery temperatures on the GX Touch and have them stored in the Cerbo GX so their history is visible in the VRM. Seems like this should be doable as the battery temps are certainly known by the VE.Bus BMS and likely shared on the VE.Bus to the MultiPlus-II.
Is there some configuration change or parameter I'm not seeing in the Cerbo GX that can display and store the battery temp info? I don't necessarily need all 4 battery temps, just a single temp if that is what BMS is putting out is fine.
Any suggestions how to do this?
Thanks