This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
If I can get some advise that would great, we have 4 x Lifeline GPL-16T 400ah batteries in series and parallel for 12v at a total of 800ah, could somebody please look at these settings for the BMV 700 that we are running and advise if they are correct, close or anything that should be changed as I'm not sure I understand all the settings and what they do.
Cheers Rod 
Have a look at the BMV Youtube tutorial.
I think the only thing that might need tweeking could be the "charged voltage", depending on what your charging source is.
Ok thankyou, we have 900w solar, Victron Multiplus 12/3000/120/50, yesterday morning we were down 104ahr with the BMV indicating battery capacity 90%, within half an hour BMV was showing 100% charged, it just seemed a bit quick to be at 100% so quickly.
Cheers Rod
