This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I installed SmartSolar 150/85 and after firmware upgrade I realized that app is looping between Fetching Data and Connecting. While Fetching Data I can see that app presenting power data in background
When I disconnect VE.Direct all works, I can manage all settings and can see all parameters
Also in app I also can not see any parameters on top menu
Firmware is latest
Looks like a hardware limitation for early hardware versions.
(*) Note for early versions of SmartSolar MPPT 150/85 and 150/100: it is not possible to use both the VE.Direct port and the built-in Bluetooth Smart function at the same time. When connecting to VE.Direct, the built-in Bluetooth Smart function will not be available. These early versions can be recognized by their part number:
SmartSolar MPPT 150/85 Tr. Early version: SCC010085210.
SmartSolar MPPT 150/85 MC4. Early version: SCC010085310.
SmartSolar MPPT 150/100 Tr. Early version: SCC010100210.
SmartSolar MPPT 150/100 MC4. Early version: SCC010100310.
The same models, but then with a different part number do support using both the VE.Direct port and the built-in Bluetooth Smart function at the same time. As do all other SmartSolar MPPT models.
