question

jbeck86 avatar image
jbeck86 asked

HELP! Seelevel II to cerbo gx Resistor needed?

I recently installed the SeeLevel II n2k system and am now connecting the Cerbo GX and Touch 50. One question I have is do I really need to use the 120 ohm resistor I just read about on here? Used the 3m connector everyone recommends and a ethernet cable to the VE.Can port. Seem to have tanks working on there. Didnt use the Rj45 termination plug either. Is that necessary?

Lastly I do not have the tank levels showing up on the main screen on the touch 50. I can access but only thru menu options and not always displayed on the main screen.


Thanks

cerbo gxNMEA 2000 - N2K
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
jbeck86 avatar image
jbeck86 answered ·

Can anyone shed any light on this? I cant get any help from Garnett and Victron wont assist either.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources