question

alawwirbilal avatar image
alawwirbilal asked

Multiplus II won#t charge and shows #6 and #7

I have a three-phase system with two multis on each phase. they are connected to the victron cerbo gx and to the batteries. I'm trying to control the system with ESS mode 3 through modbus tcp. the system info screen shows #6 and #7 on the buttom and the whole system is not charging or discharging the batteries. in addition the low battery LED is flashing on all of the 6 multipluses.

Multiplus-IIbattery chargingCCGX Color Controlvebus
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Thierry Cortassa (Victron Energy Staff) avatar image
Thierry Cortassa (Victron Energy Staff) answered ·

this is a set up problem, the charge and descharge courant are set to 0 !

see manual in 6.5 https://www.victronenergy.com/media/pg/Energy_Storage_System/en/controlling-depth-of-discharge.html

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.