This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello All, very confused. Victron I.T 3600w 115/230v on a boat connected to shorepower. Very happy and (almost) quitly doing its thing until i plug in the electrical heating blanket. The buzzing is too much and changes with the setting of the heating from low = annoying to high = unbearable. The blanket is an Inventum HN1312V with a draw of 60w. Very curious why this is and if there is a way to still be warm at night and being able to sleep.
It is the heat control circuit that causes that to happen. It chops the sine wave.
You can add a diode in a half rectify the circuit in the blanket, if you are handy with that sort of thing. It helps with the blanket getting too hot. And a little with the buzzing but does not solve that issue.
