(How) is it possible to switch Relais 1 on the Cerbo if the ESS is feeding into the grid, i.e. the battery is full _and_ there is excess PV power?
Would be handy to start e.g. the washing machine when the condition is met.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
Yes you can by loading in a software assistant you can do anything supply power to hot water cylinder, washing machine or what you like based on load current, PV excess etc.
Regards
Rob D
NZ
@Rob Duthie I suppose you mean loading the assistant onto the Multi and then use it's relay? I was looking for a solution to use with the Cerbo's relais...
59 People are following this question.