question

joerg-winkel avatar image
joerg-winkel asked

Relais on Cerbo to control consumers under ESS?

(How) is it possible to switch Relais 1 on the Cerbo if the ESS is feeding into the grid, i.e. the battery is full _and_ there is excess PV power?

Would be handy to start e.g. the washing machine when the condition is met.

cerbo gxESS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Rob Duthie avatar image
Rob Duthie answered ·

Hi

Yes you can by loading in a software assistant you can do anything supply power to hot water cylinder, washing machine or what you like based on load current, PV excess etc.

Regards

Rob D

NZ

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

joerg-winkel avatar image
joerg-winkel answered ·

@Rob Duthie I suppose you mean loading the assistant onto the Multi and then use it's relay? I was looking for a solution to use with the Cerbo's relais...

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Rob Duthie avatar image Rob Duthie commented ·
Hi

Yes you can.

0 Likes 0 ·
lex33 avatar image
lex33 answered ·

oui mais comment ?


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.