I have an AC inverter connected to AC-Out-2 on a MultiPlus-ll.
A generator is going to be connected to AC-In-1
I would like to turn AC-Out-2 off when AC-In-1 is active and when Aux-Input-2 is open due to a BMS high battery voltage signal.
AC-Out-2 turns off when AC-In-1 is active but AC-Out-2 will not turn off when Aux-2 (BMS high) is open because it is still being driven to stay on by AC-In-1 not being active.
The idea of this is to avoid using a contactor on the AC inverter.
Can these two be done in combination?
Hopefully makes sense!