Hi,
I want implement my Victron system into Home Assistant.
I read a values via Modbus, but I'm really not sure which adress is for AC loads, Critical Loads and Total consumption, because values are not same as in VRM :
com.victronenergy.system | PV - AC-coupled on output L1 | 808 | uint16 |
com.victronenergy.system | PV - AC-coupled on output L2 | 809 | uint16 |
com.victronenergy.system | PV - AC-coupled on output L3 | 810 | uint16 |
com.victronenergy.system | PV - AC-coupled on input L1 | 811 | uint16 |
com.victronenergy.system | PV - AC-coupled on input L2 | 812 | uint16 |
com.victronenergy.system | PV - AC-coupled on input L3 | 813 | uint16 |
com.victronenergy.system | PV - AC-coupled on generator L1 | 814 | uint16 |
com.victronenergy.system | PV - AC-coupled on generator L2 | 815 | uint16 |
com.victronenergy.system | PV - AC-coupled on generator L3 | 816 | uint16 |
com.victronenergy.system | AC Consumption L1 | 817 | uint16 |
com.victronenergy.system | AC Consumption L2 | 818 | uint16 |
com.victronenergy.system | AC Consumption L3 | 819 | uint16 |
com.victronenergy.system | Grid L1 | 820 | int16 |
com.victronenergy.system | Grid L2 | 821 | int16 |
com.victronenergy.system | Grid L3 | 822 | int16 |
com.victronenergy.system | Genset L1 | 823 | int16 |
com.victronenergy.system | Genset L2 | 824 | int16 |
com.victronenergy.system | Genset L3 | 825 | int16 |
Thanks for help