question

hdp avatar image
hdp asked

Capture victron data in labview

I want to capture victron data with a gx device or mppt in the labview software platform

cerbo gxBMScommunication protocol
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

I'm pretty sure Labview can use ModbusTCP? Then you could use that to read the holding registers if you enable ModbusTCP service on the CerboGX.

ModbusTCP register list is available for download from thechnical documents page:
https://www.victronenergy.com/support-and-downloads/technical-information

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.