I want to capture victron data with a gx device or mppt in the labview software platform
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I want to capture victron data with a gx device or mppt in the labview software platform
I'm pretty sure Labview can use ModbusTCP? Then you could use that to read the holding registers if you enable ModbusTCP service on the CerboGX.
ModbusTCP register list is available for download from thechnical documents page:
https://www.victronenergy.com/support-and-downloads/technical-information
Victron VE.Bus BMS product page
Victron 3rd party BMS compatibility page
Additional resources still need to be added for this topic
44 People are following this question.