Hello, Community Folk~
My application is on a "dry" cabin instead of a damp boat. The project will be 48v nominal on the battery side. First, I wish to know the length of the standard connection cable from the IO Extender to the CANvu display.
Next I wish to know if an extension cable is available--maybe I don't need five meters between the two units but kindly address the question as if I do. (I can't get in to measure for several weeks.) Acknowledged that energy to run the touch screen must run through the cable so I'm sure there's a limit relating to that.
If an extension cord is not available, can one splice the factory cable longer without major brain damage? How many wires & what approximate gauge? Clearly this would be my last resort but the splices would be in a dry location & I can solder fairly well.
Thanks in advance~