question

andy156 avatar image
andy156 asked

Why are there two DC connection points on the Quattro?

I am getting a solar/battery setup based around the Quattro 10000. I was wondering why there are two DC connections. Is it to give more flexibility for wiring with smaller wires?

I am planning on running for sustained periods at 200A on the 48V side. At the moment this is using a single 95mm wire under 1.5m long. I am presuming it doesn't affect the Quattro only using a single connection point with the maximum current?

Thanks

MultiPlus Quattro Inverter Chargerquattro 10kva
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

It is as you say, two connections offer the flexibility to use two cables of smaller CSA which can make installation easier in certain situations.
A single 95mm² would also be acceptable for a 10kVA Quattro.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.