question

piraya avatar image
piraya asked

How to interupt an autostarted generator from CCGX, without destroying the next start/stop cycle.

My Quattro and CCGX starts and stops the generator perfectly, primarily based on battery voltage conditions, with start at 12,5 V (~20% SOC) and stop at 13,7 V (~70% SOC). However, sometimes I would like to stop it just to get peace, but without distroying the conditions for the next cycle. I.e. if I stop it manually from the CCGX at lets say 13,5 V and leave it like that, I want it to autostart again at 12,5 V, not having to remember to reset anything before I leave it in stopped condition. Like a timer that will catch up its normal cycle whichever state you leave it in. Any tips?

Generator
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers