This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi have an cerbo gx and 2x multiplus 12/3000 in parallel configuration in use.
Test was done with Cerbo FW 2.89 release and 2.90/22 beta and FW497 on both multiplus
What works:I can switch the mode of multiplus via vrm portal and in the menu section of cerbo!
What doesnt works: Can`t switch the mode in the grafical UI, nothing happends when I touch on multiplus
My question here: does this belongs to me? if so where is my mistake, if not when will be the solution available?
Thx, Ahmet
There is no control graphical overview page, it is for viewing. When you want to change the mode then you can do it from the menu screens. That is the normal functionality.
If you want to add functionality yourself then there is Guimods option. Bear in mind the is not officially supported, but it may be what you want.
Use the search box at the top to look for Guimods or also check threads in the modifications section.
