Hello Forum !
I do have an issue with updating firmware on Multiplus-2 device using the MK3 USDB-to-VeBus dongle.
Neither VeFlash nor VictronConnect apps 'find' any device connected to the 'other' side of that unshielded-factory made RJ-45 cable 'behind' the USB-to-VeBus adaptor.
The PC is a Win7 machine with SP1, the Multiplus is a 48/3000/35-32 230V, just purchased, SN HQ2207FYF69V.
When using the VeConfigure program on that same PC, same same cable, all works fine
(i.e. i can 'get' and 'send' the config for that multiplus without issues).
all the programs (VeFlash, VeConfigure, VictronConnect) are on the latest downloadable version ...
That exact same thing happens with my 'old' (2017) Multiplus built into the 'EasySolar' box.
VeConfigure is ok, neither VeFalsh nor VictronConnect 'finds' that device.
If there is anyone out there who could point me to some more in-depth troubleshooting steps
(logfiles of VeFlash or VictronConnect ? - those glorious completely useless errormessages starting with 'unable' or 'failed' are not helping at all ...) or has another idea howto upgrade firmware on the Multiplus-es - much appreciated !
thanks a lot ,
Martin