question

jjsun avatar image
jjsun asked

2 Fronius primo + 1 Multiplus II


Hello everybody

I have already a Fronius 4.6 and want to put more panels at home and a DIY -LiFePo battery

Will this work? can be configured and monitored correctly with the CerboGX?

captura-de-pantalla-2022-08-14-a-las-222750.png



Want to control batteries charging + power feed to the grid.

Multiplus-IIFronius
captura-de-pantalla-2022-08-14-a-las-222750.png (418.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Rob Duthie avatar image
Rob Duthie answered ·

Hi

Yes that will work OK i have a very similar system running that way.

Regards

Rob D

NZ

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jjsun avatar image
jjsun answered ·

Thank you Rob,

do you have a picture where I can see how does Victron monitors and represents the diagram in a screen?

can you regulate how much do you feed into the grid and which sources you use to charge the battery?

Thank you

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Rob Duthie avatar image Rob Duthie commented ·

Hi Yes you can.

victron-ccgx-screen-shot.png

screenshot-192.png

0 Likes 0 ·
victron-ccgx-screen-shot.png (45.9 KiB)
screenshot-192.png (272.9 KiB)