question

M. K. avatar image
M. K. asked

MPPT RS 450 200 Stopped

I have installed the MPPT 450 200 and sudenly it stopped and it is showing low PV input. please advise if anyone else is facing the same issue?

1660229606852.png


1660229655967.png


MPPT Controllers
1660229606852.png (356.4 KiB)
1660229655967.png (13.4 KiB)
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

@Mohammad Khazem

Did you follow the suggestions from the app.

Like checking voltage from panels with a meter etc. The usual fuses and breakers problem, or loose mC4 connections?

0 Likes 0 ·
M. K. avatar image M. K. Alexandra ♦ commented ·

Yes, I checked the 3 suggestions from the APP. I checked the 4 strings voltages at the MPPT inputs. also I checked the battery voltage.

Thank you

1660284339265.png

1660284357337.png


0 Likes 0 ·
1660284339265.png (1.4 MiB)
1660284357337.png (1.4 MiB)
Alexandra avatar image Alexandra ♦ M. K. commented ·
@Mohammad Khazem

Is the app reading any voltage there from the PV? If it isnt you may need to take it in for a warranty repair

1 Like 1 ·
M. K. avatar image M. K. Alexandra ♦ commented ·

I guess we have to repair it :( thank you for the support

1660285739872.png

0 Likes 0 ·
1660285739872.png (215.7 KiB)
1 Answer
Mike Dorsett avatar image
Mike Dorsett answered ·

Any internal PV fusing or protection?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.