Hi all
I'm fairly new to Victron products and need some advice for building a system to power my Home-Lab.
Goal:
Home-Lab should be powered by PV energy as long as there's enough power from pv panels and/or battery storage. As soon as there's no energy left to power my Lab it should automatically switch to Grid power. When there's again energy from pv/battery an automatic transfer to PV energy should occur.
This system shall NOT feed energy to the grid.
Already found a Automatic Transfer Switch with capability of Monitoring battery voltage; as soon as battery voltage drops a certain value it transfer to grid power and back to to PV when battery voltage above threshold. Unfortunately, this ATS is just a mechanical switch by relays. So, no phase sync to 50Hz grid does happen, which is quite dangerous for some reasons.
I very much appreciate any recommendations regarding product selection and design of such a system.
best regards,