question

stull61 avatar image
stull61 asked

Cyrix Li Charge Unit Continually Switching On and Off when connected to D400 Wind Generator

I have a D400 Wind Generator that I connected to a dedicated Cyrix Li Charge unit and then through to four Victron 90AH LIFEPO4 batteries. The Li Charge unit keeps switching on and off, which causes the windgen to brake, producing a humming sound. The 6TB regulator that comes with the D400 windgen is factory set to 14.2V. What is causing the Li Change units to continually switch on and off.

Lithium Battery
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
boekel avatar image
boekel answered ·

You'll have to measure the voltage when this happens, otherwise it's all guessing.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources