This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
One of my fuel tank sensors indicates it is not functioning on the CerboGX display. It has functioned previously. On the first menu (Device List) page, it shows Disconnected. On the Device List settings for that tank, it says "YES" for Connected and on the Setup screen, the Sensor Value is what I am measuring at the tank. I confirmed the wire run is good. I have checked all the sensor wire connections. How do I bring this sensor back online?
Maybe reboot the cerbo first before pulling wires.
Why are all other sensors not connected ?
Have the same issue.
Sensor would cycle every 10s connected/disconnected which is the averaging time.
My sensor is at 189.1ohms, am wondering if it is because it is over the full value of 180 for European option.
Changed to custom sensor, adjusted the value to 189.1 and it seems happy now.
Will see how it goes.
Note I have another site where the value is 188.3ohms and it is happy.
Could be a 10% thing.
