This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have the Cerbo GX and a relay connected to a fan. Multiplus II and two SmartSolar Controllers.
Is it possible from the Cerbo GX to watch the temperature of the SmartShunt? Or I see an option to turn on the relay with an Alarm. Can I specifically wait for a temperature alarm?
Thanks
What is the fan cooling?
I don't think battery temperature would be the best source for temperature information to control the fan. You would be better off monitoring the temperature of the air around whatever device(s) you want to protect. There are many temperature based fan controllers on the market. Some provide proportional fan speed control based on temperature (slower for low temp, fast for high temp).
