I'm offgrid and have two Multi-plus. On the AC out I ran one multi-plus hot to L1 and the outher multi-plus to L2 in a breaker panel. Can I run both commons to a bus and then to the common in the breaker box, which is bonded to earth ground?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I'm offgrid and have two Multi-plus. On the AC out I ran one multi-plus hot to L1 and the outher multi-plus to L2 in a breaker panel. Can I run both commons to a bus and then to the common in the breaker box, which is bonded to earth ground?
30 People are following this question.