On my yacht i have just fitted an Orion Smart 12/12-30 isolated B2B charger charging a new 150AH lithium battery with a built in BMS for my Domestic power. This is fed by a new 100Ah AGM start battery supplied by a regular 100 Amp alternator. The problem I have is that the Orion charger enters Absoprtion charge too soon (3-5amps) with the Lithium battery at about 55% when it should still be in bulk mode. I have ensured that the charge voltages are as per specification for the battery (14.4v charge, 13.8v float), the charger is close to the start and domestic batteries (50cm) and the cabling is oversized 6mm2 I also have a new Victron Smart Solar 20 amp charger that is connected to the same battery which is in bulk (engine off) mode while the Orion was in Absorption mode. I also have a new victron 30amp 240v mains charger which was bulk charging 20-30amps I would like the Orion to Bulk charge to at least 80%, is the smart solar confusing the Orion? can yo help?