Hello, I've studied this page: https://www.victronenergy.com/live/vrm_portal:alarms
...and this page: https://www.victronenergy.com/live/ccgx:generator_start_stop
...and in the Color Control GX , I've set AC input 2 on the Quattro for "Generator"...and I've set the CCGX relay for Generator start/stop...
...and on the "Generator start/stop" menu in CCGX I've set "Auto start functionality" to on and I've gone to "Settings" within the "Gen start/stop" menu & set to "Detect generator at AC input"...
...and I've seen this image on the CCGX display:
So I'm making progress but I need the alarm to result in an email to the generator repair technician. I went to Alarm Rules on the VRM portal, chose to add an alarm to the CCGX then I bogged down. Under alarm parameter "AC IN 2" there's an on/off slider for "Generator" & under parameter "Generator Run Reason" there are ten more sliders...none of which jump out as the obvious choice for completing the email alert setup.
Just a bit of coaching from the Community should complete this tutorial on how to set up email generator alerts. Thanks & Jolliness.