I have the following devices:
1. Multiplus II 48/5000
2. Cerbo GX
3. Mecer 3000 lithium battery (manual attached - I believe this is an oem / rebranded Pylontech 3000)
I am struggling to get the battery to show in the list of devices when I connect to the Cerbo; I have used both RJ45 cable types as supplied with the battery from the CAN IN on the battery to the BMS-Can port on the Cerbo; with a terminator in the second BMS-Can port.
The status on the BMS-Can port indicates 2 packets are transmitted to the port every few seconds; but there are no errors and nothing received back. Any suggestions or ways to trouble shoot the comms?