question

steve-hirst avatar image
steve-hirst asked

My 100/20 controller has just been installed to 2 X 25w 24v 60cell panels and there has been no input show from the panels. The battery state of change is all that is shown

MPPT Controllers
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

Please ccheck the voltage at the PV connections, I suspect you have the panels incorrectly wired.


also please send a diagram of how you have connected everything .


Thanks

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.