**Edit
So, after tearing my hair out, I decided to run a Cat 5 cable around 60 meters and connected it to the multi through the victron RS485 to USB lead.
I now have the TX/RX flasing on both the ET112 and the RS485 adpter, not continuously but in bursts, pause for a second, then another burst.
However....Still nothing showing up in energy meters!! How can I try and identify whats causing it not to show?
Hi all,
Read as many posts as I can, but nothing has solved my issue.
I'm using a multiplus II GX and an ET112.
Connection between the two via Zigbee.
At first i've been tearing my hair out thinking the Zigbees were not connecting. However, I have plugged the Zigbee USB into my laptop and it connected to the ET112 straight away using the UCS program.
Still won't show up on energy meters.
What else can I check?
Thanks in advance