This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
System: MPII ESS with Cerbo and local screen display and 2 MPPT´s
During vacation I was unable to find system data via VRM; lock in possible but no longer actual data available.
Back home same situation via PC, than I tried to get local access via bluetooth, no connection possible for Cerbo. MPPTs are fine.
Im not the detail speci and newcomer in this community; Is there any chance for help?
Can add screen shot, but no idear how to use here.
KR
Eckart
You will probably have to pull the power plug out and wait a few minutes then plug it back in.
Not something I would normally recommend.
Then when it has finished the reboot, you can set it up to reboot when there is no contact automatically
Hi Alexandra,
many thanks for your assistance.
Wean while I followed up a similar way to solve the problem.
- first I restarted MPII incl. battery whithout success; because MPPT feed the 48V busbars .
- didn´t rermeber that Cerbo was connected via pluc, therefore I took out the fuse
- reboot was autimatic
Best regards
Eckart
So now on your device go to
Settings - vrm online portal - reboot on no contact enable that.
Then the system can sort out its own connection.
