Is it possible to read the state of the Aux1 input (closed or open) from the ccgx?
--dalon
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Is it possible to read the state of the Aux1 input (closed or open) from the ccgx?
--dalon
I am not sure which relay you want to read? Which device has the relay?
There is a list of registers to read. There are some relays which can be read (or written).
Check out the register list to see if you can address the relay that you are thinking about.
There is an Excel spreadsheet that you can download to see a list of the registers available:
https://www.victronenergy.com/support-and-downloads/whitepapers
6 People are following this question.
Generation of surplus with the grid, Anti-island protection Quattro.
Victron Quattro 5000 VA with Contactors
Victron Color Control GX- Quattro Shore current limit
2654 Quattro 48/8000/110-2x100 vs 2655 Quattro 48/8000/110-2x100
Quattro based SOC % counts down too slowly but CCGX displays correct AC load wattage