This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I am researching and and really like option on another unit, not mention here, and it allows in multiple units to assign master to carry load to a set point and then slave come on at that point. Basically slave/s sleep until load demands needed. Can MulitPlus be set up this way?
Multiplus inverters in parallel usually share the load. This is not usually a problem. The difference in inverter efficiency would be too small to notice, unless you spend a lot of time on really light loads. AES does help save power in this situation. If you have one really big load that is only occasionally used, it might be worth putting this on it's own system.
2 5k would be 36 watts.
