I have a 5kVA multiplus ProductId 1959. Is came with firmware 143. I upgraded the firmware to 159. VE.flash worked up to the last point where it verified the firmaware and then reported a general error.
I used a MK2usb to do the update. I disconnected the CCGX during update process.
Now all the LEDs on the unit flash. The unit is providing output power. If I connect the CCGX it shows that the unit software was updated to 1959159, which is should be.
Any ideas how I fix the LEDs from flashing?
Additional info from CCGX:
Product Id: 1959
Firmware version: 159
Device instance: 257
VE.Bus version: 1959159
MK2 device: MK3
MK2 version: 1170204
Regards
Riaan van Wyk