Hi All,
Quick question on VE Config setting.
Set Up - Parallel grid tied AC ESS, Multiplus II, Venus OS (pi4), 30m external Current Sensor connected directly to the Multi, existing PV with grid tied 'dumb' inverter using victron AC current sensor, (NO power meters).
Question1 - In VE Configure General Tab - 'External current sensor connected' - should this be ticked ? -
Question2 - Now in the ESS settings on the VRM portal after loading the assistants what do we select under 'Control without grid meter' - On or Off ? We have no grid meter as we are using the current sensor, however its a parallel system so the house loads are not installed on the AC out as stated in the ESS manual ?
Thanks for taking the time to read this and any help you are able to offer.